Oil Pressure Sensor Low Voltage
Low voltage detected at the oil pressure sensor.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The oil pressure sensor measures the oil pressure in the engine. If it sees a voltage drop below about 0.2 volts, it triggers this code indicating low oil pressure or a sensor issue.
What the computer is actually seeing
The engine control module (ECM) expects the oil pressure sensor output to be between 0.5 volts (low pressure) and 4.5 volts (high pressure). A reading under 0.2 volts indicates a fault.
What a healthy reading looks like
Normal oil pressure sensor voltage should typically range from 0.5 to 4.5 volts, depending on pressure conditions.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Check the current engine oil level and top off if low. Decision point: Is the level adequate?
- 22. Inspect the wiring harness and connectors to the oil pressure sensor for damage or corrosion. Decision point: Is there visible wear?
- 33. Use a multimeter to measure the voltage at the oil pressure sensor connector while the engine is running. Decision point: Is the voltage between 0.5 and 4.5 volts?
- 44. If the voltage is low, replace the oil pressure sensor. If it's in range but code persists, check the engine oil pump.
Common causes
- Faulty oil pressure sensor
- Wiring issues or open circuit
- Low engine oil level
- Oil pump failure
Typical repair cost
$$
Related codes
Frequently asked questions
Is it safe to drive if this code is present?
It may not be safe to drive. Low oil pressure can lead to engine damage if not addressed.
Will this problem come back after clearing the code?
If the underlying issue isn't fixed, the code will likely return.
Why does this sensor code often pair with other codes?
Oil pressure issues can affect multiple systems, triggering related sensor codes.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →